縫前設備 縫制設備 縫制配件 整理設備 繡花機 內衣機械 服裝輔助設備 洗滌機械 二手服裝機械 其它服裝機械
廣東宏闊試驗設備有限公司
會員1.png)
廣東宏闊試驗設備有限公司
| 參 考 價 | 面議 |
產品型號
品 牌
廠商性質其他
所 在 地東莞市
紡織服裝機械網采購部電話：0571-88918531
QQ:2568841715
聯系方式：查看聯系方式
更新時間：2024-12-16 12:41:00瀏覽次數：63次
聯系我時，請告知來自 紡織服裝機械網■產品特點Features●中文界面、支持XP/Win7/Win8
●中文界面、支持XP/Win7/Win8；
●USB接口、即插即用、通訊穩定快速；
●試驗數據全程記錄、快速回放、點重啟；
●面板配置自閉環按鈕，方便振動試驗故障診斷；
●全智能化參數設置、專家系統支持、簡單操作；
●TI300MHz、32位浮點雙核DSP,24位144dB AD/DA；
●2—16個輸入通道（電壓/電荷/ICP選配），1～2個輸出；
●隨機100dB動態范圍，12800譜線數、10kHz分析頻率；
●自帶JJG、GJB150.86、GJB150.15、810F等標準參數。
數字振動控制器
Digital Vibration Controller
VCS系列振動控制器具有全系列的振動試驗功能，能夠在電動或液壓振動臺上實現隨機、正弦掃額、諧振搜索和駐留、典型沖擊、正弦加隨機、隨機加隨機、在寬帶隨機下實現窄帶隨機加正弦、沖擊響應譜控制、瞬態仿真、道路譜模擬等振動試驗?？刂栖浖\(yùn)行在Windows7/810下，界面友好，操作便捷；同時系統還提供完善的試驗進程管理、數據指示和試驗報告生成等功能，使得測試更加方便、可靠。
振動控制儀采用模塊設計和分布式數據處理方案，容易進行通道及試驗功能擴充。32位高速雙DSP處理結構、低噪聲電路設計技術.24A/D和D/A硬件，高速USB2.0數據通訊電路組成，采用自適應控制算法的控制軟件功能強大，將振動控制系統技術性能提高一個全新的水平。
VCS series vibration controller has the full range of vibration test function, which can achieve random, sinusoidal sweep, resonance search and dwell, classical shock, sinusoidal-random, random-random on electrodynamic or hydraulic vibration table, and achieve narrowbａnd random-sinusoidal, shock response spectrum control, transient simulation, road spectrum, etc simulated vibration test under random broadband. Windows 7/8/10 control software with friendly interface and convenient operation. At the same time, the system also provides perfect testing process management, data instructions and test report generation, making the test more convenient and reliable.
Vibration control system adopts modular design and distributed data processing program to carry out the expansion of the channel and test function easily. Composed of32-bit high speed DSP processing structure, low noise circuit design technology, 24 bit A/D and D/A hardware, high-speed USB2.0 data communication circuit, the control software of the adaptive control algorithm id powerful, and improve the technical performance of vibrational control system to a new level.
●控制精度高，動態范圍寬；
●控制性能完善，具有全系列標準測試功能；
●多重安全保障，有效保護振動臺和功率放大器等試驗設備；
●內置ICP恒流源和電荷放大器，電壓和電荷輸出型振動傳感器可直接接入系統；
●小量級信號檢查系統控制環性能，測試系統傳遞函數；
●自動或手動生成WORD試驗報告，用戶可定制報告內容；
●實現啟動、暫停、停機和繼續等遠程操作；
●AC單端、AC雙端、DC單端、DC雙端；
●USB2.0通訊接口與PC機相連，方便快捷，即插即用；
●High control precision, wide dynamic range;
●Perfect control performance, with a full range of standard test functions;
●Multiple safety protection, effectively protect the shaker, power amplifier and other test equipment;
●Built-in ICP constant current source and charge amplifier, vibration sensor of voltage and charge output can be directly connected to the system;
●Small signal checking the performance of the system control loop and test system transfer function;
●Automatically or manually generate WORD test report. Users can self-customize report content
●Allow start pause, stop, continue, etc remote operations;
●AC single ended, AC double ended, DC single ended, DC double ended;
●USB2.0 communication port connected with PC, quick and convenient.
| 基本型號Table model | VCSUSB-2 | VCSUSB-8 | |||
| 控制通道Control Channel | 1 | 1 | |||
| 測量通道Measure channel | 2 | 可擴展至16Can be extended to 16 bits | |||
| 輸入阻抗Input Impedance | 500kΩ | 500kΩ | |||
| 輸出阻抗Output lmpedance | 30kΩ | 30kΩ | |||
| 輸出電壓范圍Output Voltage rang | ±10V的峰值電壓Peak Voltage | ≦±5V的峰值電壓Peak Voltage | |||
| 輸入類型Input Type | AC/2CP | AC/ICP | |||
| 正弦 | 動態范圍Dynamic Rang | ＞90dB | ＞95dB | ||
| 控制時間Control Time | ＜10ms | ＜10ms | |||
| 控制精度Control Accuracy | ±1dB200自由度達到90%的可信度 | ||||
| 頻率范圍Frequency Range | 1~4680Hz | 0.4~12000Hz | |||
| 掃描速率Scanning rate | 對數Logarithm | 0~100Oct/min | 0~100Oct/min | ||
| 線性Linear | 0~6000Hz/s | 0~6000Hz/s | |||
| 掃描方式Scan type | 對數/線性Logarithm/Linear | 對數/線性Logarithm/Linear | |||
| 隨機Random | 動態范圍Dynamic Rang | ＞80dB | ＞90dB | ||
| 控制精度Control Accuracy | ±1dB（200個自由度） | ±1dB（200個自由度） | |||
| 頻率范圍Frequency Range | 1~4680Hz | DC-11KHz | |||
| 譜線數Spectrum Range | 100、200、400、800 | 110、225、450、900、1800 | |||
| 自由度Freedom | 2~1000 | 2~1000 | |||
| 經典沖擊Classic Shock | 脈沖持續時間Pulse Duration | 0.5~3000ms | 0.5~3000ms | ||
| 頻率范圍Frequency Range | DC-22000Hz | DC-22000Hz | |||
| 容差類型Tolerance Type | MIL-STD-810或用戶自定義 or user defined | ||||
| 沖擊波形Shock Wave | 半正弦、前鋒鋸齒、三角波、矩形、梯形或自定義Half sine, From peak saw tooth, Triangle, Rectangle or user-defined | ||||
| 楨長度Frame Length | 128~16384 | ||||
| 平均次數Average Times | 1~200 | ||||
| 補償方法Compensation Method | 前后脈沖補償，前脈沖補償，后脈沖補償Front and back compensation, Front pulse compensation, Back pulse compensation | ||||
| 諧振搜尋與駐留Resonant search and dwell | 正弦加隨機Sine and Random | ||||
| 其他Others | 隨機加隨機Random and Random | ||||
| 正弦加隨機加隨機Sin and Random and Random | |||||
| 沖擊響應譜(SPS)控制(SPS) control | |||||
| 路普仿真Loop Simulation | |||||
| 諧振搜尋與駐留Resonant search and dwell | |||||
| 運行平臺Operating Platform | Windows 2000/XP | ||||
*可選擇另外的控制器Other controllers option
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
紡織服裝機械網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
